beslan/f746_mini_apl
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
2_etiket
f746_mini_apl/PinNames.h
Beslan f0b5e527fe 2 этикетки
2022-06-28 17:20:43 +03:00

428 lines
10 KiB
C
Raw Permalink Blame History

/* mbed Microcontroller Library
* SPDX-License-Identifier: BSD-3-Clause
******************************************************************************
*
* Copyright (c) 2016-2021 STMicroelectronics.
* All rights reserved.
*
* This software component is licensed by ST under BSD 3-Clause license,
* the "License"; You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
******************************************************************************
*
* Automatically generated from STM32CubeMX/db/mcu/STM32F746ZGTx.xml
*/
/* MBED TARGET LIST: NUCLEO_F746ZG */
#ifndef MBED_PINNAMES_H
#define MBED_PINNAMES_H
#include "PinNamesTypes.h"
#include "cmsis.h"
#ifdef __cplusplus
extern "C" {
#endif
typedef enum {
ALT0 = 0x100,
ALT1 = 0x200,
ALT2 = 0x300,
} ALTx;
typedef enum {
PA_0 = 0x00,
PA_0_ALT0 = PA_0 | ALT0, // same pin used for alternate HW
PA_0_ALT1 = PA_0 | ALT1, // same pin used for alternate HW
PA_1 = 0x01,
PA_1_ALT0 = PA_1 | ALT0, // same pin used for alternate HW
PA_1_ALT1 = PA_1 | ALT1, // same pin used for alternate HW
PA_2 = 0x02,
PA_2_ALT0 = PA_2 | ALT0, // same pin used for alternate HW
PA_2_ALT1 = PA_2 | ALT1, // same pin used for alternate HW
PA_3 = 0x03,
PA_3_ALT0 = PA_3 | ALT0, // same pin used for alternate HW
PA_3_ALT1 = PA_3 | ALT1, // same pin used for alternate HW
PA_4 = 0x04,
PA_4_ALT0 = PA_4 | ALT0, // same pin used for alternate HW
PA_5 = 0x05,
PA_5_ALT0 = PA_5 | ALT0, // same pin used for alternate HW
PA_6 = 0x06,
PA_6_ALT0 = PA_6 | ALT0, // same pin used for alternate HW
PA_7 = 0x07,
PA_7_ALT0 = PA_7 | ALT0, // same pin used for alternate HW
PA_7_ALT1 = PA_7 | ALT1, // same pin used for alternate HW
PA_7_ALT2 = PA_7 | ALT2, // same pin used for alternate HW
PA_8 = 0x08,
PA_9 = 0x09,
PA_10 = 0x0A,
PA_11 = 0x0B,
PA_12 = 0x0C,
PA_13 = 0x0D,
PA_14 = 0x0E,
PA_15 = 0x0F,
PA_15_ALT0 = PA_15 | ALT0, // same pin used for alternate HW
PB_0 = 0x10,
PB_0_ALT0 = PB_0 | ALT0, // same pin used for alternate HW
PB_0_ALT1 = PB_0 | ALT1, // same pin used for alternate HW
PB_1 = 0x11,
PB_1_ALT0 = PB_1 | ALT0, // same pin used for alternate HW
PB_1_ALT1 = PB_1 | ALT1, // same pin used for alternate HW
PB_2 = 0x12,
PB_3 = 0x13,
PB_3_ALT0 = PB_3 | ALT0, // same pin used for alternate HW
PB_4 = 0x14,
PB_4_ALT0 = PB_4 | ALT0, // same pin used for alternate HW
PB_5 = 0x15,
PB_5_ALT0 = PB_5 | ALT0, // same pin used for alternate HW
PB_6 = 0x16,
PB_6_ALT0 = PB_6 | ALT0, // same pin used for alternate HW
PB_7 = 0x17,
PB_8 = 0x18,
PB_8_ALT0 = PB_8 | ALT0, // same pin used for alternate HW
PB_9 = 0x19,
PB_9_ALT0 = PB_9 | ALT0, // same pin used for alternate HW
PB_10 = 0x1A,
PB_11 = 0x1B,
PB_12 = 0x1C,
PB_13 = 0x1D,
PB_14 = 0x1E,
PB_14_ALT0 = PB_14 | ALT0, // same pin used for alternate HW
PB_14_ALT1 = PB_14 | ALT1, // same pin used for alternate HW
PB_15 = 0x1F,
PB_15_ALT0 = PB_15 | ALT0, // same pin used for alternate HW
PB_15_ALT1 = PB_15 | ALT1, // same pin used for alternate HW
PC_0 = 0x20,
PC_0_ALT0 = PC_0 | ALT0, // same pin used for alternate HW
PC_0_ALT1 = PC_0 | ALT1, // same pin used for alternate HW
PC_1 = 0x21,
PC_1_ALT0 = PC_1 | ALT0, // same pin used for alternate HW
PC_1_ALT1 = PC_1 | ALT1, // same pin used for alternate HW
PC_2 = 0x22,
PC_2_ALT0 = PC_2 | ALT0, // same pin used for alternate HW
PC_2_ALT1 = PC_2 | ALT1, // same pin used for alternate HW
PC_3 = 0x23,
PC_3_ALT0 = PC_3 | ALT0, // same pin used for alternate HW
PC_3_ALT1 = PC_3 | ALT1, // same pin used for alternate HW
PC_4 = 0x24,
PC_4_ALT0 = PC_4 | ALT0, // same pin used for alternate HW
PC_5 = 0x25,
PC_5_ALT0 = PC_5 | ALT0, // same pin used for alternate HW
PC_6 = 0x26,
PC_6_ALT0 = PC_6 | ALT0, // same pin used for alternate HW
PC_7 = 0x27,
PC_7_ALT0 = PC_7 | ALT0, // same pin used for alternate HW
PC_8 = 0x28,
PC_8_ALT0 = PC_8 | ALT0, // same pin used for alternate HW
PC_9 = 0x29,
PC_9_ALT0 = PC_9 | ALT0, // same pin used for alternate HW
PC_10 = 0x2A,
PC_10_ALT0 = PC_10 | ALT0, // same pin used for alternate HW
PC_11 = 0x2B,
PC_11_ALT0 = PC_11 | ALT0, // same pin used for alternate HW
PC_12 = 0x2C,
PC_13 = 0x2D,
PC_14 = 0x2E,
PC_15 = 0x2F,
PD_0 = 0x30,
PD_1 = 0x31,
PD_2 = 0x32,
PD_3 = 0x33,
PD_4 = 0x34,
PD_5 = 0x35,
PD_6 = 0x36,
PD_7 = 0x37,
PD_8 = 0x38,
PD_9 = 0x39,
PD_10 = 0x3A,
PD_11 = 0x3B,
PD_12 = 0x3C,
PD_13 = 0x3D,
PD_14 = 0x3E,
PD_15 = 0x3F,
PE_0 = 0x40,
PE_1 = 0x41,
PE_2 = 0x42,
PE_3 = 0x43,
PE_4 = 0x44,
PE_5 = 0x45,
PE_6 = 0x46,
PE_7 = 0x47,
PE_8 = 0x48,
PE_9 = 0x49,
PE_10 = 0x4A,
PE_11 = 0x4B,
PE_12 = 0x4C,
PE_13 = 0x4D,
PE_14 = 0x4E,
PE_15 = 0x4F,
PF_0 = 0x50,
PF_1 = 0x51,
PF_2 = 0x52,
PF_3 = 0x53,
PF_4 = 0x54,
PF_5 = 0x55,
PF_6 = 0x56,
PF_7 = 0x57,
PF_8 = 0x58,
PF_9 = 0x59,
PF_10 = 0x5A,
PF_11 = 0x5B,
PF_12 = 0x5C,
PF_13 = 0x5D,
PF_14 = 0x5E,
PF_15 = 0x5F,
PG_0 = 0x60,
PG_1 = 0x61,
PG_2 = 0x62,
PG_3 = 0x63,
PG_4 = 0x64,
PG_5 = 0x65,
PG_6 = 0x66,
PG_7 = 0x67,
PG_8 = 0x68,
PG_9 = 0x69,
PG_10 = 0x6A,
PG_11 = 0x6B,
PG_12 = 0x6C,
PG_13 = 0x6D,
PG_14 = 0x6E,
PG_15 = 0x6F,
PH_0 = 0x70,
PH_1 = 0x71,
PH_2 = 0x72,
PH_3 = 0x73,
PH_4 = 0x74,
PH_5 = 0x75,
PH_6 = 0x76,
PH_7 = 0x77,
PH_8 = 0x78,
PH_9 = 0x79,
PH_10 = 0x7A,
PH_11 = 0x7B,
PH_12 = 0x7C,
PH_13 = 0x7D,
PH_14 = 0x7E,
PH_15 = 0x7F,
/**** ADC internal channels ****/
ADC_TEMP = 0xF0, // Internal pin virtual value
ADC_VREF = 0xF1, // Internal pin virtual value
ADC_VBAT = 0xF2, // Internal pin virtual value
#ifdef TARGET_FF_ARDUINO_UNO
// Arduino Uno (Rev3) pins
ARDUINO_UNO_A0 = PA_3,
ARDUINO_UNO_A1 = PC_0,
ARDUINO_UNO_A2 = PC_3,
ARDUINO_UNO_A3 = PF_3,
ARDUINO_UNO_A4 = PF_5,
ARDUINO_UNO_A5 = PF_10,
ARDUINO_UNO_D0 = PG_9,
ARDUINO_UNO_D1 = PG_14,
ARDUINO_UNO_D2 = PF_15,
ARDUINO_UNO_D3 = PE_13,
ARDUINO_UNO_D4 = PF_14,
ARDUINO_UNO_D5 = PE_11,
ARDUINO_UNO_D6 = PE_9,
ARDUINO_UNO_D7 = PF_13,
ARDUINO_UNO_D8 = PF_12,
ARDUINO_UNO_D9 = PD_15,
ARDUINO_UNO_D10 = PD_14,
ARDUINO_UNO_D11 = STM32_D11_SPI_ETHERNET_PIN,
ARDUINO_UNO_D12 = PA_6,
ARDUINO_UNO_D13 = PA_5,
ARDUINO_UNO_D14 = PB_9,
ARDUINO_UNO_D15 = PB_8,
#endif
// Arduino extension pins
A6 = PB_1,
A7 = PC_2,
A8 = PF_4,
D16 = PC_6,
D17 = PB_15,
D18 = PB_13,
D19 = PB_12,
D20 = PA_15,
D21 = PC_7,
D22 = PB_5,
D23 = PB_3,
D24 = PA_4,
D25 = PB_4,
D26 = PB_6,
D27 = PB_2,
D28 = PD_13,
D29 = PD_12,
D30 = PD_11,
D31 = PE_2,
D32 = PA_0,
D33 = PB_0,
D34 = PE_0,
D35 = PB_11,
D36 = PB_10,
D37 = PE_15,
D38 = PE_14,
D39 = PE_12,
D40 = PE_10,
D41 = PE_7,
D42 = PE_8,
D43 = PC_8,
D44 = PC_9,
D45 = PC_10,
D46 = PC_11,
D47 = PC_12,
D48 = PD_2,
D49 = PG_2,
D50 = PG_3,
D51 = PD_7,
D52 = PD_6,
D53 = PD_5,
D54 = PD_4,
D55 = PD_3,
D56 = PE_2,
D57 = PE_4,
D58 = PE_5,
D59 = PE_6,
D60 = PE_3,
D61 = PF_8,
D62 = PF_7,
D63 = PF_9,
D64 = PG_1,
D65 = PG_0,
D66 = PD_1,
D67 = PD_0,
D68 = PF_0,
D69 = PF_1,
D70 = PF_2,
D71 = PA_7,
// STDIO for console print
#ifdef MBED_CONF_TARGET_STDIO_UART_TX
CONSOLE_TX = MBED_CONF_TARGET_STDIO_UART_TX,
#else
CONSOLE_TX = PA_9,
#endif
#ifdef MBED_CONF_TARGET_STDIO_UART_RX
CONSOLE_RX = MBED_CONF_TARGET_STDIO_UART_RX,
#else
CONSOLE_RX = PA_10,
#endif
/**** USB FS pins ****/
USB_OTG_FS_DM = PA_11,
USB_OTG_FS_DP = PA_12,
USB_OTG_FS_ID = PA_10,
USB_OTG_FS_SOF = PA_8,
USB_OTG_FS_VBUS = PA_9,
/**** USB HS pins ****/
USB_OTG_HS_DM = PB_14,
USB_OTG_HS_DP = PB_15,
USB_OTG_HS_ID = PB_12,
USB_OTG_HS_SOF = PA_4,
USB_OTG_HS_ULPI_CK = PA_5,
USB_OTG_HS_ULPI_D0 = PA_3,
USB_OTG_HS_ULPI_D1 = PB_0,
USB_OTG_HS_ULPI_D2 = PB_1,
USB_OTG_HS_ULPI_D3 = PB_10,
USB_OTG_HS_ULPI_D4 = PB_11,
USB_OTG_HS_ULPI_D5 = PB_12,
USB_OTG_HS_ULPI_D6 = PB_13,
USB_OTG_HS_ULPI_D7 = PB_5,
USB_OTG_HS_ULPI_DIR = PC_2,
USB_OTG_HS_ULPI_NXT = PC_3,
USB_OTG_HS_ULPI_STP = PC_0,
USB_OTG_HS_VBUS = PB_13,
/**** ETHERNET pins ****/
ETH_COL = PA_3,
ETH_CRS = PA_0,
ETH_CRS_DV = PA_7,
ETH_MDC = PC_1,
ETH_MDIO = PA_2,
ETH_PPS_OUT = PG_8,
ETH_PPS_OUT_ALT0 = PB_5,
ETH_REF_CLK = PA_1,
ETH_RXD0 = PC_4,
ETH_RXD1 = PC_5,
ETH_RXD2 = PB_0,
ETH_RXD3 = PB_1,
ETH_RX_CLK = PA_1,
ETH_RX_DV = PA_7,
ETH_RX_ER = PB_10,
ETH_TXD0 = PB_12,
ETH_TXD0_ALT0 = PG_13,
ETH_TXD1 = PB_13,
ETH_TXD1_ALT0 = PG_14,
ETH_TXD2 = PC_2,
ETH_TXD3 = PE_2,
ETH_TXD3_ALT0 = PB_8,
ETH_TX_CLK = PC_3,
ETH_TX_EN = PB_11,
ETH_TX_EN_ALT0 = PG_11,
/**** OSCILLATOR pins ****/
RCC_OSC32_IN = PC_14,
RCC_OSC32_OUT = PC_15,
RCC_OSC_IN = PH_0,
RCC_OSC_OUT = PH_1,
/**** DEBUG pins ****/
SYS_JTCK_SWCLK = PA_14,
SYS_JTDI = PA_15,
SYS_JTDO_SWO = PB_3,
SYS_JTMS_SWDIO = PA_13,
SYS_JTRST = PB_4,
SYS_TRACECLK = PE_2,
SYS_TRACED0 = PE_3,
SYS_TRACED0_ALT0 = PC_1,
SYS_TRACED0_ALT1 = PG_13,
SYS_TRACED1 = PE_4,
SYS_TRACED1_ALT0 = PC_8,
SYS_TRACED1_ALT1 = PG_14,
SYS_TRACED2 = PE_5,
SYS_TRACED2_ALT0 = PD_2,
SYS_TRACED3 = PE_6,
SYS_TRACED3_ALT0 = PC_12,
SYS_WKUP1 = PA_0,
SYS_WKUP2 = PA_2,
SYS_WKUP3 = PC_1,
SYS_WKUP4 = PC_13,
//F746 Module
EE_SCL = PB_8,
EE_SDA = PB_9,
OUT1 = PB_7,
OUT2 = PB_4,
OUT3 = PB_3,
OUT4 = PE_9,
OUT5 = PH_10,
IN1 = PA_5,
IN2 = PA_7,
IN3 = PB_1,
IN4 = PB_0,
RS4851_DIR = PG_12,
RS4851_RX = PC_7,
RS4851_TX = PC_6,
// Not connected
NC = (int) 0xFFFFFFFF
} PinName;
// Standardized LED and button names
#define LED1 PE_9 // LD1 [Green]
#ifdef __cplusplus
}
#endif
#endif
Reference in New Issue View Git Blame Copy Permalink