Import Mbed OS hard-float snapshot

TEST_APPS/testcases/nanostack_mac_tester/send_data_indirect.py

@@ -0,0 +1,134 @@
+"""
+Copyright (c) 2017, Arm Limited and affiliates.
+SPDX-License-Identifier: Apache-2.0
+
+Licensed under the Apache License, Version 2.0 (the "License");
+you may not use this file except in compliance with the License.
+You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+Unless required by applicable law or agreed to in writing, software
+distributed under the License is distributed on an "AS IS" BASIS,
+WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+See the License for the specific language governing permissions and
+limitations under the License.
+"""
+
+import os,sys
+from icetea_lib.bench import Bench
+from icetea_lib.TestStepError import TestStepFail
+
+class Testcase(Bench):
+    def __init__(self):
+        Bench.__init__(self, name = "send_data_indirect",
+                        title = "Indirect data transmission test",
+                        status = "released",
+                        type = "smoke",
+                        subtype = "",
+                        execution = {
+                            "skip": {
+                                "value": False,
+                                "reason": ""
+                            }
+                        },
+                        author = "Valtteri Erkkila",
+                        purpose = "Tests sending data indirectly, i.e polling the coordinator for data",
+                        feature = ["MCPS-DATA", "MLME-POLL"],
+                        component = ["MAC"],
+                        requirements = {
+                            "duts": {
+                                '*': {
+                                    "count":3,
+                                    "type": "hardware",
+                                    "allowed_platforms": ["K64F", "K66F", "NUCLEO_F429ZI", "KW41Z"],
+                                    "application": {
+                                       "name": "TEST_APPS-device-nanostack_mac_tester"
+                                    }
+                                },
+                                "1":{"nick": "First"},
+                                "2":{"nick": "Second"},
+                                "3":{"nick": "Third"}
+                        }}
+        )
+
+    def setUp(self):
+        self.channel = 11
+
+    def do_test_iteration(self):
+        self.channel = 11
+        self.command("First", "mlme-reset")
+        self.command("Second", "mlme-reset")
+        self.command("Third", "mlme-reset")
+
+        self.command("First", "addr --64-bit 01:02:03:00:00:00:00:01")
+        self.command("Second", "addr --64-bit 01:02:03:00:00:00:00:02")
+        self.command("Third", "addr --64-bit 01:02:03:00:00:00:00:03")
+
+        # Start PAN coordinator
+        self.command("First", "start --pan_coordinator true --logical_channel {}".format(self.channel))
+        # Start PAN beacon
+        self.command("Second", "start --pan_coordinator false --logical_channel {}".format(self.channel))
+        self.command("Third", "start --pan_coordinator false --logical_channel {}".format(self.channel))
+
+        # Set MAC RX on-while-idle off
+        self.command("Second", "mlme-set --attr 0x52 --value_uint8 0 --value_size 1")
+        self.command("Third", "mlme-set --attr 0x52 --value_uint8 0 --value_size 1")
+
+        # Add neighbours
+        self.command("First", "add-neigh --frame_ctr 0 --mac16 0xFFFF --mac64 01:02:03:00:00:00:00:02 --pan_id 0x1234 --index 0")
+        self.command("First", "add-neigh --frame_ctr 0 --mac16 0xFFFF --mac64 01:02:03:00:00:00:00:03 --pan_id 0x1234 --index 1")
+        self.command("Second", "add-neigh --frame_ctr 0 --mac16 0xFFFF --mac64 01:02:03:00:00:00:00:01 --pan_id 0x1234 --index 0")
+        self.command("Third", "add-neigh --frame_ctr 0 --mac16 0xFFFF --mac64 01:02:03:00:00:00:00:01 --pan_id 0x1234 --index 0")
+
+        # Configure indirect data
+        self.command("Second", "config-status --data_ind abcde")
+        self.command("Third", "config-status --data_ind 12345")
+
+        # Runs into timing issues if extensive printing is enabled
+        self.command("*", "silent-mode on")
+
+        # Send data indirectly to DUT2
+        self.command("First", "data --dst_addr 01:02:03:00:00:00:00:02 --msdu_length 5 --msdu abcde --indirect_tx true --wait_for_confirm false")
+        # Poll DUT1 for data
+        self.command("Second", "poll --coord_address 01:02:03:00:00:00:00:01")
+
+        # Send more data
+        self.command("First", "data")
+        self.command("First", "data")
+        # Poll more data
+        self.command("Second", "poll")
+        self.command("Second", "poll")
+        # Set expected poll return status to 0xEB(no data after poll)
+        self.command("Second", "config-status --poll 235")
+        # No data should remain to be polled for
+        self.command("Second", "poll")
+
+        # Set expected poll return status to 0xEB(no data after poll)
+        self.command("Second", "config-status --poll 235")
+        # Send data to DUT3
+        self.command("First", "data --dst_addr 01:02:03:00:00:00:00:03 --msdu 12345")
+        # Poll(expected failure)
+        self.command("Second", "poll")
+        # Poll DUT1 for data(expected success)
+        self.command("Third", "poll --coord_address 01:02:03:00:00:00:00:01")
+        self.command("*", "silent-mode off")
+
+    def case(self):
+        # Try tests few times because of potential RF failures
+        loop = 0
+        while loop < 5:
+            try:
+                self.do_test_iteration()
+                break
+            except TestStepFail:
+                self.logger.info("Warning, iteration failed #"  + str(loop+1))
+                loop = loop + 1
+                self.delay(5)
+        else:
+             raise TestStepFail("Too many failed iterations!")
+
+    def tearDown(self):
+        self.command("*", "silent-mode off")
+        self.reset_dut()
+