Import Mbed OS hard-float snapshot

targets/TARGET_NUVOTON/TARGET_M2351/mbed_overrides.c

@@ -0,0 +1,105 @@
+/*
+ * Copyright (c) 2015-2016, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include "cmsis.h"
+#include "mbed_error.h"
+
+void mbed_sdk_init(void)
+{
+    // NOTE: Support singleton semantics to be called from other init functions
+    static int inited = 0;
+    if (inited) {
+        return;
+    }
+    inited = 1;
+
+#if defined (__ARM_FEATURE_CMSE) && (__ARM_FEATURE_CMSE == 3U)    
+    /*---------------------------------------------------------------------------------------------------------*/
+    /* Init System Clock                                                                                       */
+    /*---------------------------------------------------------------------------------------------------------*/
+    /* Unlock protected registers */
+    SYS_UnlockReg();
+
+    /* Enable HIRC clock (Internal RC 12MHz) */
+    CLK_EnableXtalRC(CLK_PWRCTL_HIRCEN_Msk);
+    /* Enable HXT clock (external XTAL 12MHz) */
+    CLK_EnableXtalRC(CLK_PWRCTL_HXTEN_Msk);
+    /* Enable LIRC for lp_ticker */
+    CLK_EnableXtalRC(CLK_PWRCTL_LIRCEN_Msk);
+    /* Enable LXT for RTC */
+    CLK_EnableXtalRC(CLK_PWRCTL_LXTEN_Msk);
+    /* Enable HIRC48 clock (Internal RC 48MHz) */
+    CLK_EnableXtalRC(CLK_PWRCTL_HIRC48EN_Msk);
+
+    /* Wait for HIRC clock ready */
+    CLK_WaitClockReady(CLK_STATUS_HIRCSTB_Msk);
+    /* Wait for HXT clock ready */
+    CLK_WaitClockReady(CLK_STATUS_HXTSTB_Msk);
+    /* Wait for LIRC clock ready */
+    CLK_WaitClockReady(CLK_STATUS_LIRCSTB_Msk);
+    /* Wait for LXT clock ready */
+    CLK_WaitClockReady(CLK_STATUS_LXTSTB_Msk);
+    /* Wait for HIRC48 clock ready */
+    CLK_WaitClockReady(CLK_STATUS_HIRC48STB_Msk);
+
+    
+#if defined(NU_CHIP_MAJOR) && (NU_CHIP_MAJOR == 1UL)
+    /* NOTE: There is a reset halt issue with PLL in A version. Work around it
+     *       by using HIRC48 instead of PLL as HCLK clock source. */
+
+    /* Trim HIRC48 to 48M against LXT */
+
+    /* Reset TISTS48M status flags */
+    SYS->TISTS48M |= (SYS_TISTS48M_FREQLOCK_Msk | SYS_TISTS48M_TFAILIF_Msk | SYS_TISTS48M_CLKERRIF_Msk);
+    
+    /* With reference clock from LXT, start trimming HIRC48 to 48M */
+    SYS->TCTL48M = (SYS->TCTL48M & ~(SYS_TCTL48M_FREQSEL_Msk | SYS_TCTL48M_REFCKSEL_Msk)) | (0x01 << SYS_TCTL48M_FREQSEL_Pos) | (0x00 << SYS_TCTL48M_REFCKSEL_Pos);
+    
+    /* Wait for HIRC48 clock locked */
+    while (1)
+    {
+        if (SYS->TISTS48M & SYS_TISTS48M_FREQLOCK_Msk)
+        {
+            break;
+        }
+        else if (SYS->TISTS48M & SYS_TISTS48M_TFAILIF_Msk)
+        {
+            error("HIRC48 auto-trim error: SYS_TISTS48M_TFAILIF_Msk");
+        }
+        else if (SYS->TISTS48M & SYS_TISTS48M_CLKERRIF_Msk)
+        {
+            error("HIRC48 auto-trim error: SYS_TISTS48M_CLKERRIF_Msk");
+        }
+    }
+    
+    CLK_SetHCLK(CLK_CLKSEL0_HCLKSEL_HIRC48, CLK_CLKDIV0_HCLK(1UL));
+#else
+    /* Set core clock as 64M from PLL */
+    CLK_SetCoreClock(FREQ_64MHZ);
+#endif
+    
+    /* Update System Core Clock */
+    /* User can use SystemCoreClockUpdate() to calculate SystemCoreClock. */
+    SystemCoreClockUpdate();
+
+    /* Lock protected registers */
+    SYS_LockReg();
+#else
+    SystemCoreClockUpdate();
+#endif		
+}