Import Mbed OS hard-float snapshot

targets/TARGET_NUVOTON/TARGET_M251/TARGET_NUMAKER_IOT_M252/PinNames.h

@@ -0,0 +1,114 @@
+/*
+ * Copyright (c) 2019, Nuvoton Technology Corporation
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_PINNAMES_H
+#define MBED_PINNAMES_H
+
+#include "cmsis.h"
+#include "PinNamesCommon.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+typedef enum {
+    /* Not connected */
+    NC = (int)0xFFFFFFFF,
+
+    /* Generic naming */
+    PA_0    = NU_PINNAME(0, 0), PA_1, PA_2, PA_3, PA_4, PA_5, PA_6, PA_7, PA_8, PA_9, PA_10, PA_11, PA_12, PA_13, PA_14, PA_15,
+    PB_0    = NU_PINNAME(1, 0), PB_1, PB_2, PB_3, PB_4, PB_5, PB_6, PB_7, PB_8, PB_9, PB_10, PB_11, PB_12, PB_13, PB_14, PB_15,
+    PC_0    = NU_PINNAME(2, 0), PC_1, PC_2, PC_3, PC_4, PC_5, PC_6, PC_7, PC_8, PC_9, PC_10, PC_11, PC_12, PC_14 = PC_12 + 2,
+    PD_0    = NU_PINNAME(3, 0), PD_1, PD_2, PD_3, PD_4, PD_5, PD_6, PD_7, PD_8, PD_9, PD_10, PD_11, PD_12, PD_13, PD_15 = PD_13 + 2,
+    PE_0    = NU_PINNAME(4, 0), PE_1, PE_2, PE_3, PE_4, PE_5, PE_6, PE_7, PE_8, PE_9, PE_10, PE_11, PE_12, PE_13, PE_14, PE_15,
+    PF_0    = NU_PINNAME(5, 0), PF_1, PF_2, PF_3, PF_4, PF_5, PF_6, PF_7, PF_14 = PF_7 + 7,
+
+    /* Arduino UNO naming */
+    A0 = PB_7,
+    A1 = PB_6,
+    A2 = PB_5,
+    A3 = PB_4,
+    A4 = PB_0,
+    A5 = PB_1,
+
+    D0 = PB_2,
+    D1 = PB_3,
+    D2 = PC_4,
+    D3 = PC_5,
+    D4 = PC_3,
+    D5 = PC_2,
+    D6 = PA_7,
+    D7 = PA_6,
+    D8 = PA_5,
+    D9 = PA_4,
+    D10 = PA_3,
+    D11 = PA_0,
+    D12 = PA_1,
+    D13 = PA_2,
+    D14 = PC_0,
+    D15 = PC_1,
+
+    /* Other board-specific naming */
+
+    /* UART naming */
+#if defined(MBED_CONF_TARGET_USB_UART_TX)
+    USBTX           = MBED_CONF_TARGET_USB_UART_TX,
+#else
+    USBTX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_USB_UART_RX)
+    USBRX           = MBED_CONF_TARGET_USB_UART_RX,
+#else
+    USBRX           = NC,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_TX)
+    STDIO_UART_TX   = MBED_CONF_TARGET_STDIO_UART_TX,
+#else
+    STDIO_UART_TX   = USBTX,
+#endif
+#if defined(MBED_CONF_TARGET_STDIO_UART_RX)
+    STDIO_UART_RX   = MBED_CONF_TARGET_STDIO_UART_RX,
+#else
+    STDIO_UART_RX   = USBRX,
+#endif
+    SERIAL_TX       = D10,
+    SERIAL_RX       = D13,
+
+    /* I2C naming */
+    I2C_SCL = D15,
+    I2C_SDA = D14,
+
+    /* LED naming */
+    LED_RED = PB_14,
+    LED1    = LED_RED,
+    LED2    = LED1,     // No real LED. Just for passing ATS.
+    LED3    = LED1,     // No real LED. Just for passing ATS.
+    LED4    = LED1,     // No real LED. Just for passing ATS.
+
+    /* Button naming */
+
+    /* Force PinName to 32-bit required by NU_PINNAME_BIND(...) */
+    FORCE_ENUM_PINNAME_32BIT = 0x7FFFFFFF,
+
+} PinName;
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // MBED_PINNAMES_H