Import Mbed OS hard-float snapshot

targets/TARGET_STM/TARGET_STM32WB/objects.h

@@ -0,0 +1,153 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2019 ARM Limited
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "gpio_object.h"
+#include "stm32wbxx_ll_usart.h"
+#include "stm32wbxx_ll_tim.h"
+#include "stm32wbxx_ll_pwr.h"
+#include "stm32wbxx_ll_rtc.h"
+#include "stm32wbxx_ll_hsem.h"
+
+#ifndef FEATURE_BLE
+#error "BLE FEATURE CANNOT BE REMOVED"
+#endif
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct pwmout_s {
+    PWMName pwm;
+    PinName pin;
+    uint32_t prescaler;
+    uint32_t period;
+    uint32_t pulse;
+    uint8_t channel;
+    uint8_t inverted;
+};
+
+struct spi_s {
+    SPI_HandleTypeDef handle;
+    IRQn_Type spiIRQ;
+    SPIName spi;
+    PinName pin_miso;
+    PinName pin_mosi;
+    PinName pin_sclk;
+    PinName pin_ssel;
+#if DEVICE_SPI_ASYNCH
+    uint32_t event;
+    uint8_t transfer_type;
+#endif
+};
+
+struct serial_s {
+    UARTName uart;
+    int index; // Used by irq
+    uint32_t baudrate;
+    uint32_t databits;
+    uint32_t stopbits;
+    uint32_t parity;
+    PinName pin_tx;
+    PinName pin_rx;
+#if DEVICE_SERIAL_ASYNCH
+    uint32_t events;
+#endif
+#if DEVICE_SERIAL_FC
+    uint32_t hw_flow_ctl;
+    PinName pin_rts;
+    PinName pin_cts;
+#endif
+};
+
+struct i2c_s {
+    /*  The 1st 2 members I2CName i2c
+     *  and I2C_HandleTypeDef handle should
+     *  be kept as the first members of this struct
+     *  to ensure i2c_get_obj to work as expected
+     */
+    I2CName  i2c;
+    I2C_HandleTypeDef handle;
+    uint8_t index;
+    int hz;
+    PinName sda;
+    PinName scl;
+    IRQn_Type event_i2cIRQ;
+    IRQn_Type error_i2cIRQ;
+    uint32_t XferOperation;
+    volatile uint8_t event;
+    volatile int pending_start;
+#if DEVICE_I2CSLAVE
+    uint8_t slave;
+    volatile uint8_t pending_slave_tx_master_rx;
+    volatile uint8_t pending_slave_rx_maxter_tx;
+#endif
+#if DEVICE_I2C_ASYNCH
+    uint32_t address;
+    uint8_t stop;
+    uint8_t available_events;
+#endif
+};
+
+struct flash_s {
+    /*  nothing to be stored for now */
+    uint32_t dummy;
+};
+
+struct analogin_s {
+    ADC_HandleTypeDef handle;
+    PinName pin;
+    uint8_t channel;
+};
+
+#define HAL_CRC_IS_SUPPORTED(polynomial, width) ((width) == 7 || (width) == 8 || (width) == 16 || (width) == 32)
+
+struct gpio_irq_s {
+    IRQn_Type irq_n;
+    uint32_t irq_index;
+    uint32_t event;
+    PinName pin;
+};
+
+struct port_s {
+    PortName port;
+    uint32_t mask;
+    PinDirection direction;
+    __IO uint32_t *reg_in;
+    __IO uint32_t *reg_out;
+};
+
+struct trng_s {
+    RNG_HandleTypeDef handle;
+};
+
+#ifdef __cplusplus
+}
+#endif
+
+/* STM32WB HAL doesn't provide some macro */
+#define __HAL_RCC_PWR_CLK_DISABLE()
+#define __HAL_RCC_PWR_CLK_ENABLE()
+#define __HAL_RCC_PWR_IS_CLK_ENABLED() 1
+
+#endif