Import Mbed OS hard-float snapshot

targets/TARGET_Samsung/TARGET_SIDK_S5JS100/objects.h

@@ -0,0 +1,136 @@
+/****************************************************************************
+ *
+ * Copyright 2020 Samsung Electronics All Rights Reserved.
+ * SPDX-License-Identifier: Apache-2.0
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ * http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing,
+ * software distributed under the License is distributed on an
+ * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND,
+ * either express or implied. See the License for the specific
+ * language governing permissions and limitations under the License.
+ *
+ ****************************************************************************/
+
+#ifndef MBED_OBJECTS_H
+#define MBED_OBJECTS_H
+
+#include "cmsis.h"
+#include "PortNames.h"
+#include "PeripheralNames.h"
+#include "PinNames.h"
+#include "i2c_def.h"
+#include "spi_def.h"
+#include "serial_api.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct gpio_irq_s {
+    uint32_t ch;
+};
+
+struct port_s {
+    __IO uint32_t *reg_dir;
+    __IO uint32_t *reg_dirclr;
+    __IO uint32_t *reg_out;
+    __IO  uint32_t *reg_in;
+    PortName port;
+    uint32_t mask;
+};
+
+typedef enum {
+    USI0_PORT_ID = 0,
+    USI1_PORT_ID,
+    USI_MAX_PORTS
+} t_usi_ports_enum;
+
+typedef enum {
+    PL011_UART0_ID = 0,
+    PL011_UART1_ID,
+    PL011_UART_MAX
+} t_pl011_ports_enum;
+
+typedef enum {
+    DUMMY_UART0_ID = 0,
+    DUMMY_UART1_ID,
+    DUMMY_UART_MAX
+} t_dummy_ports_enum;
+
+
+struct uart_ops_s {
+    void (*serial_baud)(void *obj, int baudrate);
+    void (*serial_format)(void *obj, int data_bits, SerialParity parity, int stop_bits);
+    void (*serial_irq_handler)(void *obj, uart_irq_handler handler, uint32_t id);
+    void (*serial_irq_set)(void *obj, SerialIrq irq, uint32_t enable);
+    void (*serial_putc)(void *obj, int c);
+    int (*serial_writable)(void *obj);
+    int (*serial_getc)(void *obj);
+    int (*serial_readable)(void *obj);
+#if DEVICE_SERIAL_FC
+    void (*serial_set_flow_control)(serial_t *obj, FlowControl type, PinName rxflow, PinName txflow);
+#endif
+};
+
+
+struct serial_s {
+    void *uart;
+    int index;
+    int rx_fifo_depth;
+    int tx_fifo_depth;
+    struct uart_ops_s ops;
+};
+
+struct i2c_s {
+    I2C_TypeDef *i2c;
+    uint16_t last_xfer_address;
+    unsigned int xfer_speed;
+    unsigned int mode;
+    unsigned int base;
+    unsigned int timeout;
+    unsigned int slave_addr;
+    unsigned int addrlen;
+    unsigned int master;
+    int retries;
+    unsigned char initialized;
+    int clock;
+};
+
+struct spi_s {
+    SPI_TypeDef *spi;
+    unsigned int freqid;
+    unsigned int nbits;
+    unsigned int base;
+    unsigned int mode;
+    unsigned int frequency;
+    unsigned int actual;
+};
+
+struct analogin_s {
+    ADCName adc;
+    PinName  pin;
+    uint32_t pin_number;
+    __IO uint32_t address;
+};
+
+struct flash_s {
+    uint32_t dummy;
+};
+
+struct trng_s {
+    uint32_t dummy;
+};
+
+#include "gpio_object.h"
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif