Files
2026-06-01 20:15:04 +03:00

127 lines
4.4 KiB
C

/**************************************************************************//**
* @file crc.c
* @version V3.00
* @brief Cyclic Redundancy Check(CRC) driver source file
*
* @copyright (C) 2019 Nuvoton Technology Corp. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted provided that the following conditions are met:
* 1. Redistributions of source code must retain the above copyright notice,
* this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright notice,
* this list of conditions and the following disclaimer in the documentation
* and/or other materials provided with the distribution.
* 3. Neither the name of Nuvoton Technology Corp. nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*****************************************************************************/
#include "NuMicro.h"
/** @addtogroup Standard_Driver Standard Driver
@{
*/
/** @addtogroup CRC_Driver CRC Driver
@{
*/
/** @addtogroup CRC_EXPORTED_FUNCTIONS CRC Exported Functions
@{
*/
/**
* @brief CRC Open
*
* @param[in] u32Mode CRC operation polynomial mode. Valid values are:
* - \ref CRC_CCITT
* - \ref CRC_8
* - \ref CRC_16
* - \ref CRC_32
* @param[in] u32Attribute CRC operation data attribute. Valid values are combined with:
* - \ref CRC_CHECKSUM_COM
* - \ref CRC_CHECKSUM_RVS
* - \ref CRC_WDATA_COM
* - \ref CRC_WDATA_RVS
* @param[in] u32Seed Seed value.
* @param[in] u32DataLen CPU Write Data Length. Valid values are:
* - \ref CRC_CPU_WDATA_8
* - \ref CRC_CPU_WDATA_16
* - \ref CRC_CPU_WDATA_32
*
* @return None
*
* @details This function will enable the CRC controller by specify CRC operation mode, attribute, initial seed and write data length. \n
* After that, user can start to perform CRC calculate by calling CRC_WRITE_DATA macro or CRC_DAT register directly.
*/
void CRC_Open(uint32_t u32Mode, uint32_t u32Attribute, uint32_t u32Seed, uint32_t u32DataLen)
{
CRC_T *pCRC;
pCRC = CRC;
pCRC->SEED = u32Seed;
pCRC->CTL = u32Mode | u32Attribute | u32DataLen | CRC_CTL_CRCEN_Msk;
/* Setting CHKSINIT bit will reload the initial seed value(CRC_SEED register) to CRC controller */
pCRC->CTL |= CRC_CTL_CHKSINIT_Msk;
}
/**
* @brief Get CRC Checksum
*
* @param[in] None
*
* @return Checksum Result
*
* @details This macro gets the CRC checksum result by current CRC polynomial mode.
*/
uint32_t CRC_GetChecksum(void)
{
CRC_T *pCRC;
uint32_t u32Checksum = 0UL;
pCRC = CRC;
switch(pCRC->CTL & CRC_CTL_CRCMODE_Msk)
{
case CRC_CCITT:
case CRC_16:
u32Checksum = (pCRC->CHECKSUM & 0xFFFFUL);
break;
case CRC_32:
u32Checksum = pCRC->CHECKSUM;
break;
case CRC_8:
u32Checksum = (pCRC->CHECKSUM & 0xFFUL);
break;
default:
break;
}
return u32Checksum;
}
/*@}*/ /* end of group CRC_EXPORTED_FUNCTIONS */
/*@}*/ /* end of group CRC_Driver */
/*@}*/ /* end of group Standard_Driver */
/*** (C) COPYRIGHT 2019 Nuvoton Technology Corp. ***/