0ef1717155
Some checks failed
Basic Checks / license-check (push) Has been cancelled
Basic Checks / include-check (push) Has been cancelled
Basic Checks / style-check (push) Has been cancelled
Basic Checks / docs-check (push) Has been cancelled
Basic Checks / python-tests (push) Has been cancelled
Basic Checks / pin-validation (push) Has been cancelled
Basic Checks / cmake-checks (push) Has been cancelled
Basic Checks / frozen-tools-check (push) Has been cancelled
Publish or Update docker image for head of branch / prepare-tags (push) Has been cancelled
Release or update docker image for a released mbed-os version / prepare-tags (push) Has been cancelled
Publish or Update docker image for head of branch / build-container (push) Has been cancelled
Publish or Update docker image for head of branch / test-container (linux/amd64) (push) Has been cancelled
Publish or Update docker image for head of branch / test-container (linux/arm64) (push) Has been cancelled
Publish or Update docker image for head of branch / deploy-container (push) Has been cancelled
Release or update docker image for a released mbed-os version / build-container (push) Has been cancelled
Release or update docker image for a released mbed-os version / test-container (linux/amd64) (push) Has been cancelled
Release or update docker image for a released mbed-os version / test-container (linux/arm64) (push) Has been cancelled
Release or update docker image for a released mbed-os version / deploy-container (push) Has been cancelled
Prune temporary docker images / prune-images (push) Has been cancelled
694 lines
37 KiB
C
694 lines
37 KiB
C
/***************************************************************************//**
|
|
* \file cyhal_sdhc.h
|
|
*
|
|
* \brief
|
|
* Provides a high level interface for interacting with the Cypress SDHC.
|
|
* This interface abstracts out the chip specific details. If any chip specific
|
|
* functionality is necessary, or performance is critical the low level functions
|
|
* can be used directly.
|
|
*
|
|
********************************************************************************
|
|
* \copyright
|
|
* Copyright 2018-2021 Cypress Semiconductor Corporation
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Licensed under the Apache License, Version 2.0 (the "License");
|
|
* you may not use this file except in compliance with the License.
|
|
* You may obtain a copy of the License at
|
|
*
|
|
* http://www.apache.org/licenses/LICENSE-2.0
|
|
*
|
|
* Unless required by applicable law or agreed to in writing, software
|
|
* distributed under the License is distributed on an "AS IS" BASIS,
|
|
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
* See the License for the specific language governing permissions and
|
|
* limitations under the License.
|
|
*******************************************************************************/
|
|
|
|
/**
|
|
* \addtogroup group_hal_sdhc SDHC (SD Host Controller)
|
|
* \ingroup group_hal
|
|
* \{
|
|
* High level interface to the Secure Digital Host Controller (SDHC).
|
|
*
|
|
* The SDHC driver allows data to be read from and written to an SD Card using the SDHC block.
|
|
* The data is transferred in blocks with a block size of 512 bytes.
|
|
*
|
|
* \section subsection_sdhc_features Features
|
|
* * Supports the 4-bit interface
|
|
* * Supports Ultra High Speed (UHS-I) mode
|
|
* * Supports Default Speed (DS), High Speed (HS), SDR12, SDR25 and SDR50 speed modes
|
|
*
|
|
* \section subsection_sdhc_quickstart Quick Start
|
|
* Initialize SDHC by using \ref cyhal_sdhc_init by selecting the pins according to the target device used.
|
|
* Specify the SDHC configuration using the configuration structure (const \ref cyhal_sdhc_config_t * config). <br>
|
|
* See \ref subsection_sdhc_snippet_1
|
|
*
|
|
* \section subsection_sdhc_code_snippets Code Snippets
|
|
*
|
|
* \subsection subsection_sdhc_snippet_1 Snippet 1: SDHC Initialization and configuration
|
|
* The following snippet is used to initialize the SDHC block. SDHC object - \ref cyhal_sdhc_t,
|
|
* SDHC card configuration structure (const \ref cyhal_sdhc_config_t * config). The pins connected to the SDHC block
|
|
* needs to be provided to the \ref cyhal_sdhc_init function.
|
|
* \snippet hal_sdhc.c snippet_cyhal_sdhc_init
|
|
*
|
|
* \subsection subsection_sdhc_snippet_2 Snippet 2: Reading a block of data from an SD Card
|
|
* The following snippet reads a block of data from the SD Card.
|
|
* \snippet hal_sdhc.c snippet_cyhal_sdhc_read
|
|
|
|
* \subsection subsection_sdhc_snippet_3 Snippet 3: Writing a block of data to an SD Card
|
|
* The following snippet writes a block of data to the SD Card.
|
|
* \snippet hal_sdhc.c snippet_cyhal_sdhc_write
|
|
|
|
*/
|
|
|
|
#pragma once
|
|
|
|
#include <stdint.h>
|
|
#include <stdbool.h>
|
|
#include "cy_result.h"
|
|
#include "cyhal_hw_types.h"
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* Defines
|
|
*******************************************************************************/
|
|
|
|
/** \addtogroup group_hal_results_sdhc SDHC HAL Results
|
|
* SDHC specific return codes
|
|
* \ingroup group_hal_results
|
|
* \{ *//**
|
|
*/
|
|
|
|
/** Pin related Error. */
|
|
#define CYHAL_SDHC_RSLT_ERR_PIN \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 0))
|
|
/** Requested feature is not supported on this hardware. */
|
|
#define CYHAL_SDHC_RSLT_ERR_UNSUPPORTED \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 1))
|
|
/** Timeout during waiting for erase complete. */
|
|
#define CYHAL_SDHC_RSLT_ERR_ERASE_CMPLT_TIMEOUT \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 2))
|
|
/** Block count cannot be retrieved. */
|
|
#define CYHAL_SDHC_RSLT_ERR_BLOCK_COUNT_GET_FAILURE \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 3))
|
|
/** Cannot set desired SD bus frequency. */
|
|
#define CYHAL_SDHC_RSLT_ERR_SET_FREQ \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 4))
|
|
/** Incorrect function parameter. */
|
|
#define CYHAL_SDHC_RSLT_ERR_WRONG_PARAM \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 5))
|
|
/** Error occured during I/O voltage switch sequence. */
|
|
#define CYHAL_SDHC_RSLT_ERR_IO_VOLT_SWITCH_SEQ \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 6))
|
|
/** Cannot configure data timeout. */
|
|
#define CYHAL_SDHC_RSLT_ERR_TOUT_CFG \
|
|
(CYHAL_RSLT_CREATE(CY_RSLT_TYPE_ERROR, CYHAL_RSLT_MODULE_SDHC, 7))
|
|
|
|
/**
|
|
* \}
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Enumerations
|
|
*******************************************************************************/
|
|
|
|
/** Card types */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_SD, //!< Secure Digital card
|
|
CYHAL_SDHC_SDIO, //!< SD Input Output card
|
|
CYHAL_SDHC_EMMC, //!< Embedded Multimedia card
|
|
CYHAL_SDHC_COMBO, //!< Combo Card (SD + SDIO)
|
|
CYHAL_SDHC_UNUSABLE, //!< Unusable card or unsupported type
|
|
CYHAL_SDHC_NOT_EMMC, //!< Not an eMMC card
|
|
} cyhal_sdhc_card_type_t;
|
|
|
|
/** SDHC interrupt triggers */
|
|
typedef enum {
|
|
CYHAL_SDHC_CMD_COMPLETE = 0x00001, //!< Command Complete
|
|
CYHAL_SDHC_XFER_COMPLETE = 0x00002, //!< Host read/write transfer is complete
|
|
CYHAL_SDHC_BGAP_EVENT = 0x00004, //!< This bit is set when both read/write transaction is stopped at the block gap
|
|
CYHAL_SDHC_DMA_INTERRUPT = 0x00008, //!< Host controller detects an SDMA Buffer Boundary during transfer
|
|
CYHAL_SDHC_BUF_WR_READY = 0x00010, //!< This bit is set if the Buffer Write Enable changes from 0 to 1
|
|
CYHAL_SDHC_BUF_RD_READY = 0x00020, //!< This bit is set if the Buffer Read Enable changes from 0 to 1
|
|
CYHAL_SDHC_CARD_INSERTION = 0x00040, //!< This bit is set if the Card Inserted in the Present State register changes from 0 to 1.
|
|
CYHAL_SDHC_CARD_REMOVAL = 0x00080, //!< This bit is set if the Card Inserted in the Present State register changes from 1 to 0.
|
|
CYHAL_SDHC_INT_A = 0x00200,
|
|
CYHAL_SDHC_INT_B = 0x00400,
|
|
CYHAL_SDHC_INT_C = 0x00800,
|
|
CYHAL_SDHC_RE_TUNE_EVENT = 0x01000, //!< This bit is set if the Re-Tuning Request changes from 0 to 1
|
|
CYHAL_SDHC_FX_EVENT = 0x02000, //!< This status is set when R[14] of response register is set to 1
|
|
CYHAL_SDHC_CQE_EVENT = 0x04000, //!< This status is set if Command Queuing/Crypto event has occurred
|
|
CYHAL_SDHC_ERR_INTERRUPT = 0x08000, //!< If any of the bits in the Error Interrupt Status register are set
|
|
CYHAL_SDHC_ALL_INTERRUPTS = 0x0FEFF, //!< Is used to enable/disable all interrupts
|
|
} cyhal_sdhc_event_t;
|
|
|
|
/** I/O voltage levels */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_IO_VOLTAGE_3_3V, //!< I/O voltage is 3.3V.
|
|
CYHAL_SDHC_IO_VOLTAGE_1_8V //!< I/O voltage is 1.8V.
|
|
} cyhal_sdhc_io_voltage_t;
|
|
|
|
/** SDHC I/O voltage select principle */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_IO_VOLT_ACTION_NEGOTIATE = 0U, //!< (Recommended) HAL driver performs all steps, needed for switching I/O bus voltage to certain level: sends needed commands to prepare card, changes level of io_volt_sel pin and performs switching sequence according to SD specification.
|
|
CYHAL_SDHC_IO_VOLT_ACTION_SWITCH_SEQ_ONLY = 1U, //!< HAL driver performs switching sequence (if voltage is being switched to 1.8V) and changes io_volt_sel pin level accordingly. No commands are being send to the card in this mode.
|
|
CYHAL_SDHC_IO_VOLT_ACTION_NONE = 2U, //!< I/O voltage is changed by changing io_volt_sel pin's level. No commands are being send to the card in this mode.
|
|
} cyhal_sdhc_io_volt_action_type_t;
|
|
|
|
/** SDHC response types */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_RESPONSE_NONE = 0U, //!< No Response.
|
|
CYHAL_SDHC_RESPONSE_LEN_136 = 1U, //!< Response Length 136.
|
|
CYHAL_SDHC_RESPONSE_LEN_48 = 2U, //!< Response Length 48.
|
|
CYHAL_SDHC_RESPONSE_LEN_48B = 3U //!< Response Length 48. Check Busy after response.
|
|
} cyhal_sdhc_cmd_response_type_t;
|
|
|
|
/** SDHC auto command enable selection. */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_AUTO_CMD_NONE = 0U, //!< Auto command disable.
|
|
CYHAL_SDHC_AUTO_CMD_12 = 1U, //!< Auto command 12 enable.
|
|
CYHAL_SDHC_AUTO_CMD_23 = 2U, //!< Auto command 23 enable.
|
|
CYHAL_SDHC_AUTO_CMD_AUTO = 3U //!< Auto command Auto enable.
|
|
} cyhal_sdhc_auto_cmd_t;
|
|
|
|
/** SDHC command types */
|
|
typedef enum
|
|
{
|
|
CYHAL_SDHC_CMD_NORMAL = 0U, //!< Other commands.
|
|
CYHAL_SDHC_CMD_SUSPEND = 1U, //!< CMD52 for writing "Bus Suspend" in CCCR.
|
|
CYHAL_SDHC_CMD_RESUME = 2U, //!< CMD52 for writing "Function Select" in CCCR.
|
|
CYHAL_SDHC_CMD_ABORT = 3U //!< CMD12, CMD52 for writing "I/O Abort" in CCCR.
|
|
} cyhal_sdhc_cmd_type_t;
|
|
|
|
/** SDHC command error states */
|
|
typedef enum
|
|
{
|
|
/** Last operation did not cause any error status. */
|
|
CYHAL_SDHC_NO_ERR = 0x0000U,
|
|
/** Command timeout error. In SD/eMMC Mode, this event is set only if no response is returned
|
|
* within 64 SD clock cycles from the end bit of the command. If the Host Controller detects a CMD line conflict,
|
|
* along with Command CRC Error bit, this event is set to 1, without waiting for 64 SD/eMMC card clock cycles. */
|
|
CYHAL_SDHC_CMD_TOUT_ERR = 0x0001U,
|
|
/** Command CRC error. A Command CRC Error is generated in SD/eMMC mode when:
|
|
* 1. A response is returned and the Command Timeout Error is set to 0 (indicating no timeout),
|
|
* this bit is set to 1 when detecting a CRC error in the command response.
|
|
* 2. The Host Controller detects a CMD line conflict by monitoring the CMD line when a command is issued. If
|
|
* the Host Controller drives the CMD line to level 1, but detects level 0 on the CMD line at the next SD clock
|
|
* edge, then the Host Controller aborts the command (stop driving CMD line) and sets this bit to 1. The Command
|
|
* Timeout Error is also set to 1 to distinguish a CMD line conflict. */
|
|
CYHAL_SDHC_CMD_CRC_ERR = 0x0002U,
|
|
/** Command End Bit error. This bit is set after detecting that the end bit of a command response is 0 in SD/eMMC mode. */
|
|
CYHAL_SDHC_CMD_END_BIT_ERR = 0x0004U,
|
|
/** Command Index error. This bit is set if a Command Index error occurs in the command response in SD/eMMC mode. */
|
|
CYHAL_SDHC_CMD_IDX_ERR = 0x0008U,
|
|
/** Data Timeout error. This bit is set in SD/eMMC mode when detecting one of the following timeout conditions:
|
|
* * Busy timeout for R1b, R5b type
|
|
* * Busy timeout after Write CRC status
|
|
* * Write CRC Status timeout
|
|
* * Read Data timeout. */
|
|
CYHAL_SDHC_DATA_TOUT_ERR = 0x0010U,
|
|
/** Data CRC error. This error occurs in SD/eMMC mode after detecting a CRC error while transferring read data
|
|
* that uses the DAT line, detecting the Write CRC status having a value other than 010 or when writing a CRC status timeout. */
|
|
CYHAL_SDHC_DATA_CRC_ERR = 0x0020U,
|
|
/** Data End Bit error. This error occurs in SD/eMMC mode either when detecting 0 at the end bit position of read
|
|
* data that uses the DAT line or at the end bit position of the CRC status. */
|
|
CYHAL_SDHC_DATA_END_BIT_ERR = 0x0040U,
|
|
/** Current Limit error. */
|
|
CYHAL_SDHC_CUR_LMT_ERR = 0x0080U,
|
|
/** Auto CMD error. This error status is used by Auto CMD12 and Auto CMD23 in SD/eMMC mode. This bit is set after
|
|
* detecting that any of the bits D00 to D05 in the Auto CMD Error Status register has changed from 0 to 1. D07 is
|
|
* effective in case for Auto CMD12. The Auto CMD Error Status register is valid while this bit is set to 1 and may
|
|
* be cleared by clearing this bit. */
|
|
CYHAL_SDHC_AUTO_CMD_ERR = 0x0100U,
|
|
/** ADMA error. This bit is set when the Host Controller detects an error during an ADMA-based data transfer.
|
|
* The possible reasons for an error:
|
|
* * An error response is received from the System bus;
|
|
* * ADMA3, ADMA2 Descriptors are invalid;
|
|
* * CQE Task or Transfer descriptors are invalid.
|
|
* When an error occurs, the state of the ADMA is saved in the ADMA Error Status register. */
|
|
CYHAL_SDHC_ADMA_ERR = 0x0200U,
|
|
/** Tuning error. */
|
|
CYHAL_SDHC_TUNNING_ERR = 0x0400U,
|
|
/** Response error. Host Controller Version 4.00 supports the response error check function to avoid overhead of
|
|
* the response error check by Host Driver during DMA execution. If the Response Error Check Enable is set to 1 in
|
|
* the Transfer Mode register, the Host Controller checks R1 or R5 response. If an error is detected in a response,
|
|
* this bit is set to 1. This is applicable in SD/eMMC mode. */
|
|
CYHAL_SDHC_RESP_ERR = 0x0800U,
|
|
/** Boot Acknowledgement error. This bit is set when there is a timeout for boot acknowledgement or after detecting
|
|
* the boot ACK status having a value other than 010. This is applicable only when boot acknowledgement is expected in eMMC mode. */
|
|
CYHAL_SDHC_BOOT_ACK_ERR = 0x1000U
|
|
} cyhal_sdhc_error_type_t;
|
|
|
|
/*******************************************************************************
|
|
* Typedefs
|
|
*******************************************************************************/
|
|
|
|
/** Handler for SDHC interrupts */
|
|
typedef void (*cyhal_sdhc_event_callback_t)(void *callback_arg, cyhal_sdhc_event_t event);
|
|
|
|
/*******************************************************************************
|
|
* Data Structures
|
|
*******************************************************************************/
|
|
|
|
/** Defines configuration options for the SDHC block */
|
|
typedef struct
|
|
{
|
|
bool enableLedControl; //!< Drive one IO to indicate when the card is being accessed
|
|
bool lowVoltageSignaling; //!< Whether 1.8V signaling is supported
|
|
bool isEmmc; //!< true if eMMC card, otherwise false
|
|
uint8_t busWidth; //!< The desired bus width, 1-bit, 4-bit, 8-bit
|
|
} cyhal_sdhc_config_t;
|
|
|
|
/** Defines data configuration */
|
|
typedef struct
|
|
{
|
|
uint32_t* data_ptr; //!< The pointer to data for send/receive. Data will be transfered using DMA, which will be configured automaticaly by SDHC HAL driver.
|
|
uint32_t block_size; //!< The size of the data block.
|
|
uint32_t number_of_blocks; //!< The number of blocks with size block_size to send.
|
|
cyhal_sdhc_auto_cmd_t auto_command; //!< Selects which auto commands are used if any.
|
|
bool is_read; //!< true = Read from the card, false = Write to the card.
|
|
} cyhal_sdhc_data_config_t;
|
|
|
|
/** Defines command configuration for \ref cyhal_sdhc_send_cmd function */
|
|
typedef struct
|
|
{
|
|
uint32_t command_index; //!< The index of the command.
|
|
uint32_t command_argument; //!< The argument for the command.
|
|
bool enable_crc_check; //!< Enables the CRC check on the response.
|
|
cyhal_sdhc_cmd_response_type_t response_type; //!< The response type.
|
|
bool enable_idx_check; //!< Checks the index of the response.
|
|
cyhal_sdhc_cmd_type_t command_type; //!< The command type.
|
|
cyhal_sdhc_data_config_t *data_config; //!< Data transfer configuration, defined in \ref cyhal_sdhc_data_config_t. Should be NULL if data transfer is not expected for provided command.
|
|
} cyhal_sdhc_cmd_config_t;
|
|
|
|
/*******************************************************************************
|
|
* Functions
|
|
*******************************************************************************/
|
|
|
|
/** Initialize SDHC driver and corresponding hardware.
|
|
*
|
|
* @param[out] obj Pointer to an SDHC object. The caller must allocate the memory for this object but
|
|
* the init function will initialize its contents.
|
|
* @param[in] config The card configuration object
|
|
* @param[out] clk The pin connected to the clk signal
|
|
* @param[in] cmd The pin connected to the command signal
|
|
* @param[in] data0 The pin connected to the data0 signal
|
|
* @param[in] data1 The pin connected to the data1 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data2 The pin connected to the data2 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data3 The pin connected to the data3 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data4 The pin connected to the data4 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data5 The pin connected to the data5 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data6 The pin connected to the data6 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data7 The pin connected to the data7 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] card_detect The pin connected to the card_detect signal
|
|
* Card is considered as inserted if card_detect pin in low state.
|
|
* This pin can be NC.
|
|
* @param[out] io_volt_sel The pin connected to the io_volt_sel signal. This pin changes the logic level on the
|
|
* sd_io_volt_sel line. It assumes that this line is used to control a regulator connected to the VDDIO of the MCU.
|
|
* This regulator allows for switching between the 3.3V and 1.8V signaling. High level on the pin stands for
|
|
* 1.8V signaling, while low - for 3.3V.
|
|
* This pin can be NC.
|
|
* @param[out] card_pwr_en The pin connected to the card_pwr_en signal This pin can be used to enable a voltage
|
|
* regulator used to power the card. High level on the pin - card is powered. Low - card is not powered.
|
|
* This pin can be NC.
|
|
* @param[in] card_mech_write_prot The pin connected to the card_mech_write_prot signal This pin is used for card
|
|
* mechanical write protect checking.
|
|
* If pin in high state - card is mechanically write protected, if in low state - card is not mechanically write
|
|
* protected.
|
|
* \ref cyhal_sdhc_is_card_mech_write_protected function can be used to check card write protection state.
|
|
* This pin can be NC.
|
|
* @param[in] led_ctrl The pin connected to the led_ctrl signal. This pin can be NC.
|
|
* @param[in] emmc_reset The pin connected to the emmc_reset signal. This pin can be NC.
|
|
* @return The status of the init request
|
|
*
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_init_hw(cyhal_sdhc_t *obj,
|
|
const cyhal_sdhc_config_t *config,
|
|
cyhal_gpio_t cmd,
|
|
cyhal_gpio_t clk,
|
|
cyhal_gpio_t data0,
|
|
cyhal_gpio_t data1,
|
|
cyhal_gpio_t data2,
|
|
cyhal_gpio_t data3,
|
|
cyhal_gpio_t data4,
|
|
cyhal_gpio_t data5,
|
|
cyhal_gpio_t data6,
|
|
cyhal_gpio_t data7,
|
|
cyhal_gpio_t card_detect,
|
|
cyhal_gpio_t io_volt_sel,
|
|
cyhal_gpio_t card_pwr_en,
|
|
cyhal_gpio_t card_mech_write_prot,
|
|
cyhal_gpio_t led_ctrl,
|
|
cyhal_gpio_t emmc_reset);
|
|
|
|
/** Initialize the connected card.
|
|
* \note This function should be called after \ref cyhal_sdhc_init_hw
|
|
*
|
|
* @param[in,out] obj The SDHC object
|
|
* @return The status of the card init request
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_init_card(cyhal_sdhc_t *obj);
|
|
|
|
/** Initialize the SDHC block and connected card.
|
|
* This function is a combination of \ref cyhal_sdhc_init_hw and \ref cyhal_sdhc_init_card calls.
|
|
* \note refer to \ref cyhal_sdhc_init_hw function description for detailed parameter guidance.
|
|
*
|
|
* @param[out] obj Pointer to an SDHC object. The caller must allocate the memory for this object but
|
|
* the init function will initialize its contents.
|
|
* @param[in] config The card configuration object
|
|
* @param[out] clk The pin connected to the clk signal
|
|
* @param[in] cmd The pin connected to the command signal
|
|
* @param[in] data0 The pin connected to the data0 signal
|
|
* @param[in] data1 The pin connected to the data1 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data2 The pin connected to the data2 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data3 The pin connected to the data3 signal. This pin can be NC if bus width is 1-bit.
|
|
* @param[in] data4 The pin connected to the data4 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data5 The pin connected to the data5 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data6 The pin connected to the data6 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] data7 The pin connected to the data7 signal. This pin can be NC if bus width is less than 8-bit.
|
|
* @param[in] card_detect The pin connected to the card_detect signal
|
|
* @param[out] io_volt_sel The pin connected to the io_volt_sel signal
|
|
* @param[out] card_pwr_en The pin connected to the card_pwr_en signal
|
|
* @param[in] card_mech_write_prot The pin connected to the card_mech_write_prot signal
|
|
* @param[in] led_ctrl The pin connected to the led_ctrl signal
|
|
* @param[in] emmc_reset The pin connected to the emmc_reset signal
|
|
* @return The status of the init request
|
|
*
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_init(cyhal_sdhc_t *obj,
|
|
const cyhal_sdhc_config_t *config,
|
|
cyhal_gpio_t cmd,
|
|
cyhal_gpio_t clk,
|
|
cyhal_gpio_t data0,
|
|
cyhal_gpio_t data1,
|
|
cyhal_gpio_t data2,
|
|
cyhal_gpio_t data3,
|
|
cyhal_gpio_t data4,
|
|
cyhal_gpio_t data5,
|
|
cyhal_gpio_t data6,
|
|
cyhal_gpio_t data7,
|
|
cyhal_gpio_t card_detect,
|
|
cyhal_gpio_t io_volt_sel,
|
|
cyhal_gpio_t card_pwr_en,
|
|
cyhal_gpio_t card_mech_write_prot,
|
|
cyhal_gpio_t led_ctrl,
|
|
cyhal_gpio_t emmc_reset);
|
|
|
|
/** Release the SDHC peripheral, not currently invoked. It requires further
|
|
* resource management.
|
|
*
|
|
* @param[in,out] obj The SDHC object
|
|
*/
|
|
void cyhal_sdhc_free(cyhal_sdhc_t *obj);
|
|
|
|
/** Attempts to read data synchronously over the SDHC peripheral.
|
|
*
|
|
* This will read as many blocks as possible, up to `length` blocks, into the buffer
|
|
* pointed to by `data`, then return. The value pointed to by `length` will be
|
|
* updated to reflect the number of words that were actually read.
|
|
*
|
|
* See \ref subsection_sdhc_snippet_2
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] address The address to read data from
|
|
* @param[out] data Pointer to the byte-array where data read from the device should be stored
|
|
* @param[in,out] length Number of 512 byte blocks to read, updated with the number actually read
|
|
* @return The status of the read request
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_read(const cyhal_sdhc_t *obj, uint32_t address, uint8_t *data, size_t *length);
|
|
|
|
/** Attempts to write data synchronously over SDHC peripheral
|
|
*
|
|
* This will write as many blocks as possible, up to `length` blocks, then return.
|
|
* The value pointed to by `length` will be updated to reflect the number of words
|
|
* that were actually read.
|
|
*
|
|
* See \ref subsection_sdhc_snippet_3
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] address The address to write data to
|
|
* @param[in] data Pointer to the byte-array of data to write to the device
|
|
* @param[in,out] length Number of 512 byte blocks to write, updated with the number actually written
|
|
* @return The status of the write request
|
|
*
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_write(const cyhal_sdhc_t *obj, uint32_t address, const uint8_t *data, size_t *length);
|
|
|
|
/** Erases a block of data over the SDHC peripheral
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] start_addr Is the address of the first byte to erase
|
|
* @param[in] length Number of 512 byte blocks (starting at start_addr) to erase
|
|
* @return The status of the erase request
|
|
*
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_erase(const cyhal_sdhc_t *obj, uint32_t start_addr, size_t length);
|
|
|
|
/** Start SDHC asynchronous read
|
|
*
|
|
* This will transfer `length` 512 byte blocks into the buffer pointed to by `data` in the background.
|
|
* When the requested quantity of data has been read, the \ref CYHAL_SDHC_XFER_COMPLETE event will
|
|
* be raised. See \ref cyhal_sdhc_register_callback and \ref cyhal_sdhc_enable_event.
|
|
*
|
|
* @param[in] obj The SDHC object that holds the transfer information
|
|
* @param[in] address The address to read data from
|
|
* @param[out] data The receive buffer
|
|
* @param[in,out] length Number of 512 byte blocks to read, updated with the number actually read
|
|
* @return The status of the read_async request
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_read_async(const cyhal_sdhc_t *obj, uint32_t address, uint8_t *data, size_t *length);
|
|
|
|
/** Start asynchronous SDHC write
|
|
*
|
|
* This will transfer `length` 512 byte blocks from the buffer pointed to by `data` in the background.
|
|
* When the requested quantity of data has been written, the \ref CYHAL_SDHC_XFER_COMPLETE event
|
|
* will be raised. See \ref cyhal_sdhc_register_callback and \ref cyhal_sdhc_enable_event.
|
|
*
|
|
* @param[in] obj The SDHC object that holds the transfer information
|
|
* @param[in] address The address to write data to
|
|
* @param[in] data The transmit buffer
|
|
* @param[in,out] length The number of 512 byte blocks to write, updated with the number actually written
|
|
* @return The status of the write_async request
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_write_async(const cyhal_sdhc_t *obj, uint32_t address, const uint8_t *data, size_t *length);
|
|
|
|
/** Checks if the specified SDHC peripheral is in use
|
|
*
|
|
* @param[in] obj The SDHC peripheral to check
|
|
* @return Indication of whether the SDHC is still transmitting
|
|
*/
|
|
bool cyhal_sdhc_is_busy(const cyhal_sdhc_t *obj);
|
|
|
|
/** Abort an SDHC transfer
|
|
*
|
|
* @param[in] obj The SDHC peripheral to stop
|
|
* @return The status of the abort_async request
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_abort_async(const cyhal_sdhc_t *obj);
|
|
|
|
/** Register an SDHC callback handler
|
|
*
|
|
* This function will be called when one of the events enabled by \ref cyhal_sdhc_enable_event occurs.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] callback The callback handler which will be invoked when the event fires
|
|
* @param[in] callback_arg Generic argument that will be provided to the callback when called
|
|
*/
|
|
void cyhal_sdhc_register_callback(cyhal_sdhc_t *obj, cyhal_sdhc_event_callback_t callback, void *callback_arg);
|
|
|
|
/** Configure SDHC event enablement.
|
|
*
|
|
* When an enabled event occurs, the function specified by \ref cyhal_sdhc_register_callback will be called.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] event The SDHC event type
|
|
* @param[in] intr_priority The priority for NVIC interrupt events
|
|
* @param[in] enable True to turn on interrupts, False to turn off
|
|
*/
|
|
void cyhal_sdhc_enable_event(cyhal_sdhc_t *obj, cyhal_sdhc_event_t event, uint8_t intr_priority, bool enable);
|
|
|
|
/** Checks if SD card is inserted
|
|
*
|
|
* @param[in] obj The SDHC peripheral to check
|
|
* @return Indication of whether the card is inserted.
|
|
*/
|
|
bool cyhal_sdhc_is_card_inserted(const cyhal_sdhc_t *obj);
|
|
|
|
/** Checks if the inserted SD card is mechanically write protected
|
|
*
|
|
* @param[in] obj The SDHC peripheral to check
|
|
* @return Indication of whether the inserted SD card is mechanically write protected
|
|
*/
|
|
bool cyhal_sdhc_is_card_mech_write_protected(const cyhal_sdhc_t *obj);
|
|
|
|
/** Get block count of inserted SD card / eMMC
|
|
* \note SDHC driver should be initialized with \ref cyhal_sdhc_init prior to using this function.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] block_count Pointer to variable where block count will be stored
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_get_block_count(cyhal_sdhc_t *obj, uint32_t *block_count);
|
|
|
|
/** Sets the SD bus frequency (frequency on which SD card / eMMC is accessed)
|
|
* \note Actual frequency may differ from the desired frequency due to available dividers and the frequency of source clock.
|
|
* Function will set the closest possible (but not greater than) frequency to what was requested.
|
|
* Use \ref cyhal_sdhc_get_frequency function to get actual frequency value that was achieved and set.
|
|
* \note If data timeout was configured by \ref cyhal_sdhc_set_data_read_timeout, it can be automaticaly recalculated
|
|
* according to new SD bus frequency. For details, please refer to \ref cyhal_sdhc_set_data_read_timeout function description.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] hz Desired SD bus frequency in Hz
|
|
* @param[in] negotiate Whether new frequency value needs to be negotiated with card or not. true is
|
|
* recommended and it means that new frequency will be negotiated.
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_set_frequency(cyhal_sdhc_t *obj, uint32_t hz, bool negotiate);
|
|
|
|
/** Get the actual frequency that SD bus is configured for
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @return Frequency in Hz
|
|
*/
|
|
uint32_t cyhal_sdhc_get_frequency(cyhal_sdhc_t *obj);
|
|
|
|
/** Sets the maximum time to wait for data from the card. The time is specified in number of card clock cycles.
|
|
* With SD bus frequency changed by \ref cyhal_sdhc_set_frequency, timeout can automaticaly be recalculated according
|
|
* to new clock frequency. This can be activated by 'auto_reconfigure' parameter.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] timeout Time to wait for data from the card.
|
|
* @param[in] auto_reconfigure Timeout value will be automaticaly reconfigured upon clock change
|
|
*
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_set_data_read_timeout(cyhal_sdhc_t *obj, uint32_t timeout, bool auto_reconfigure);
|
|
|
|
/** Initializes the SD block and DMA for a data transfer. It does not start a transfer.
|
|
* \ref cyhal_sdhc_send_cmd needs to be called after this function in order to start data transfer.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] data_config Data transfer configuration
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_config_data_transfer(cyhal_sdhc_t *obj, cyhal_sdhc_data_config_t *data_config);
|
|
|
|
/** Sends a command to the card and wait until it is sent. If the command assumes data transfer via data lines,
|
|
* \ref cyhal_sdhc_config_data_transfer function needs to be called prior to this one. The response of issued command
|
|
* can be retrieved by using \ref cyhal_sdhc_get_response function.
|
|
* \note Function does not wait until data (configured with \ref cyhal_sdhc_config_data_transfer) transfer complete.
|
|
* In order to do so, user can:
|
|
* - register \ref CYHAL_SDHC_XFER_COMPLETE and wait for it
|
|
* - wait until \ref cyhal_sdhc_is_busy return false
|
|
* - use \ref cyhal_sdhc_wait_transfer_complete function
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] cmd_config Command configuration
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_send_cmd(cyhal_sdhc_t *obj, cyhal_sdhc_cmd_config_t *cmd_config);
|
|
|
|
/** Returns a response of last issued by \ref cyhal_sdhc_send_cmd function command.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] response Pointer to array where response will be stored
|
|
* @param[in] large_response If true, the expected response is 136 bits, false - 48 bits, which corresponds to
|
|
* 120 and 32 bits of useful for application data respectively. So for large_response 4 uint32_t element array can be used
|
|
* while for not large_response 1 uint32_t value will be enough.
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_get_response(cyhal_sdhc_t *obj, uint32_t *response, bool large_response);
|
|
|
|
/** Wait for asynchronous data transfer to complete. Such data transfer can be triggered by \ref cyhal_sdhc_write_async,
|
|
* \ref cyhal_sdhc_read_async or by \ref cyhal_sdhc_config_data_transfer + \ref cyhal_sdhc_send_cmd functions.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_wait_transfer_complete(cyhal_sdhc_t *obj);
|
|
|
|
/** Sets the voltage level of the I/O lines.
|
|
* \note This function requires io_volt_sel and (for some cases) card_pwr_en pins to be assigned. Please refer to
|
|
* \ref cyhal_sdhc_init_hw for pin details.
|
|
* \note Switching from 1.8V to 3.3V can be done only via power cycle sequence (power down card, wait, power up card),
|
|
* which is supported by HAL driver and performed only if CYHAL_SDHC_IO_VOLT_ACTION_NEGOTIATE selected. card_pwr_en pin
|
|
* has to be assigned. Please refer to \ref cyhal_sdhc_init_hw for pin details.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] io_voltage I/O voltage to be set on lines
|
|
* @param[in] io_switch_type Defines how I/O voltage will be switched
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_set_io_voltage(cyhal_sdhc_t *obj, cyhal_sdhc_io_voltage_t io_voltage, cyhal_sdhc_io_volt_action_type_t io_switch_type);
|
|
|
|
/** Returns the current voltage level of the I/O lines
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @return Current I/O voltage setting value
|
|
*/
|
|
cyhal_sdhc_io_voltage_t cyhal_sdhc_get_io_voltage(cyhal_sdhc_t *obj);
|
|
|
|
/** Configures data bus width on host side and (optionally) informs the card about new width configuration.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @param[in] bus_width The desired bus width, 1-bit, 4-bit, 8-bit
|
|
* @param[in] configure_card Whether card needs to be configured with new bus width. true is recommended.
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_set_bus_width(cyhal_sdhc_t *obj, uint8_t bus_width, bool configure_card);
|
|
|
|
/** Returns currently configured data bus width
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @return Currently configured bus width, 1-bit, 4-bit, 8-bit
|
|
*/
|
|
uint8_t cyhal_sdhc_get_bus_width(cyhal_sdhc_t *obj);
|
|
|
|
/** Returns last issued SD operation error states. This function can be used for error checking after any of cmd / data
|
|
* transfer-related operations. For list of possible errors, that are being tracked, please refer to \ref cyhal_sdhc_error_type_t.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
* @return Errors occurred during last command
|
|
*/
|
|
cyhal_sdhc_error_type_t cyhal_sdhc_get_last_command_errors(cyhal_sdhc_t *obj);
|
|
|
|
/** Clears SDHC hardware error states. Error statuses are indicated by \ref cyhal_sdhc_get_last_command_errors function.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
*/
|
|
void cyhal_sdhc_clear_errors(cyhal_sdhc_t *obj);
|
|
|
|
/** Resets CMD and Data lines and corresponding circuits of SD Host.
|
|
*
|
|
* @param[in] obj The SDHC object
|
|
*/
|
|
void cyhal_sdhc_software_reset(cyhal_sdhc_t *obj);
|
|
|
|
/** Powers up / down the card based on provided parameter. This function uses card_pwr_en pin to change card power
|
|
* state. Please refer to \ref cyhal_sdhc_init_hw for pin description.
|
|
*
|
|
* @param[in] obj The SDHC peripheral to configure
|
|
* @param[in] enable Card is powered if true, not powered if false.
|
|
* @return The status of the operation
|
|
*/
|
|
cy_rslt_t cyhal_sdhc_enable_card_power(cyhal_sdhc_t *obj, bool enable);
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
#ifdef CYHAL_SDHC_IMPL_HEADER
|
|
#include CYHAL_SDHC_IMPL_HEADER
|
|
#endif /* CYHAL_SDHC_IMPL_HEADER */
|
|
|
|
/** \} group_hal_sdhc */
|